新疆库车县盐水沟北铜矿床地质特征及成因探讨

盐水沟北铜矿区位于新疆库车县北部,其大地构造位置处于塔吉克-塔里木陆块区、塔里木陆块、塔里木北缘隆起、库车前陆盆地,区内构造活动强烈。铜矿床赋存于新近纪中新统康村组第一岩性段,矿体呈层状,严格受地层控制。区内共圈定10个铜矿体,矿石矿物主要为孔雀石、赤铜矿、水胆矾、自然铜等,矿体内无夹石,顶、底板围岩均为褐红色及浅红色粉质泥岩。该矿床为砂岩型铜矿床。     

杭州湾中部实测波浪特性分析

利用杭州湾中部一年实测波浪资料,分析该地区的波参数统计变化特性,采用最小二乘法拟合得出相关参数之间的关系式,并统计分析了频谱特性。结果表明:杭州湾中部以小浪和轻浪为主,在各月分布较为均匀,年平均周期为2.97 s;最大一次波浪过程为冷空气影响所致,影响强度大于台风莫拉克;常浪向分布在东北至东南向,其中又以小浪出现较多,对应的波周期以2~4 s为主;强浪向主要分布在西北和东北方向,对应的波周期主要分布在3~5 s;多数特征波参数之间相关关系较好;由谱分析得知风浪占多数,且以单峰为主。研究结果可为相关工程和理论研究提供基础资料。     

日照市土壤地球化学元素分布规律及成因探讨

在日照市开展多目标区域地球化学调查，获取了表层土壤和深层土壤地球化学数据，通过对获得的地球化学参数进行统计分析，确定了日照市土壤地球化学基准值和背景值，认为日照市除部分元素或指标外，大部分元素或指标土壤地球化学基准值和背景值与全省土壤地球化学基准值和背景值接近。研究发现，日照市As，Cd，Cr，Cu，Hg，Ni，Pb，Zn等8种重金属元素背景值含量低于国家土壤环境质量标准的土壤一级标准限值，日照市土壤质量基本保持自然背景水平；而受工业化生产和城市化建设等后期人为活动影响，日照市表层土壤中Cd，C，Hg，N，P，S，Se，Corg等元素或指标出现明显富集，应引起重视。     

莱州湾南岸潍河下游地区咸水入侵灾害成因及特征

通过对莱州湾南岸咸水入侵较严重地潍河下游地区晚更新世以来沉积特征及现代自然环境条件变化的分析，探讨了沉积相对咸水入侵产生及空间范围特征的环境机理。晚更新世以来的三次海平面升降变化造成了潍河下游地区海陆沉积环境交替，形成了巨厚的海陆交互相沉积层。海进时期，大面积的滨海平原被淹没，在近海平原洼地滞留的海水经过蒸发、浓缩变为卤水，成为咸水入侵的物源；海退后陆源碎屑在滨海地区沉积形成了巨厚的古河道砂层。20世纪70年代末期以来，随着对地下淡水的过度开采，淡咸水水头压力差减小．卤水通过古河道砂层快速南侵。通过对潍河下游地区100余个地质钻孔水化学连续监测资料分析，阐明了咸水入侵的特征，有针对性地提出了咸水入侵的防治措施。     

双极化天气雷达方程

在回转椭球状降水粒子的假设下求出了降水粒子的散射截面，并且考虑了粒子轴线铅垂和随机取向两种重要的典型情况；推导了双极化雷达的回波方程以及降雨量公式。该方程除包含降水粒子的信息外，关于雷达与降水粒子间的几何关系都以雷达天线仰角及雷达与降水粒子间的距离表示，同时还考虑了地球的球面效应和大气折射效应。由于采用了并矢方法，使推导简捷明了     

P‐wave transmission across fractures with nonlinear deformational behaviour

Stress wave attenuation across fractured rock masses is a great concern of underground structure safety. When the wave amplitude is large, fractures experience nonlinear deformation during the wave propagation. This paper presents a study on normal transmission of P‐wave across parallel fractures with nonlinear deformational behaviour (static Barton–Bandis model). The results show that the magnitude of transmission coefficient is a function of incident wave amplitude, nondimensional fracture spacing and number of fractures. Two important indices of nondimensional fracture spacing are identified, and they divide the area of nondimensional fracture spacing into three parts (individual fracture area, transition area and small spacing area). In the different areas, the magnitude of transmission coefficient has different trends with nondimensional fracture spacing and number of fractures. In addition, the study reveals that under some circumstances, the magnitude of transmission coefficient increases with increasing number of fractures, and is larger than 1. Copyright © 2006 John Wiley & Sons, Ltd.     

Photopolarimetric studies of comet Austin

Photopolarimetric observations of comet Austin with the IAU/IHW filter system were obtained on the 2.34 m Vainu Bappu Telescope (VBT) of the Indian Institute of Astrophysics, at Kavalur, India, during pre-perihelion phase on February 20,1990 and on the 1.2 m telescope of the Physical Research Laboratory at Gurusikhar, Mount Abu during postperihelion phase on May 2 and 4, 1990. The comet appeared bluer than a solar analog during post-perihelion phase on May 2 and 4. The percent polarization shows a sharp increase towards the red on May 2 and 4. The dominant sizes of the dust particles appear to lie in a narrow range of 0.1 to 0.5 Μm. Regarding the molecular band emission, CN and C₂ bands are quite strong; C₃ emission was also found to be strong though the observations on May 2 and 4 show significant variation as compared to C₂ emission. Molecular band polarization for CN, C₃, C₂ and H₂ O+ have been calculated. It has been found that emission polarization in CN, C₂ and C₃ is between 1–7% (phase angle between 107.4–109 degrees). For CN and C₂ the polarization values are close to the theoretically predicted values, but for C₃ the polarization value falls much below the theoretically predicted value. A similar result was found for comet Halley.     

广西老厂铅锌矿床地质特征及其成因探讨

本文是在专题研究基础上,探讨广西老厂铅锌矿床地质特征和矿床成因。该矿床位于海洋山复式背斜南段的老厂穹窿构造核部,铅锌矿化受构造、地层和岩性控制。矿体呈脉状,产于NE向组张扭性断裂构造中;围岩为寒武系白云岩,板岩、砂岩;矿石类型以锌为主,矿物成分简单,以闪锌矿、方铅矿与石英、白云石为主,具充填、交代矿石结构、构造,矿石平均品位含Zn9.94%、Pb1.50%;围岩蚀变主要为硅化、绢云母化和碳酸盐化。据地层岩石元素丰度值、稀土元素配分和稳定同位素数据、资料,探讨了成矿物质来源于围岩,热液主要来自大气降水。因此,认为本矿床实属产于寒武系轻变质岩中的层控矿型大气降水热液铅锌矿床。     

The depolarization properties of powerful extragalactic radio sources as a function of cosmic epoch

We use the observed polarization properties of a sample of 26 powerful radio galaxies and radio-loud quasars to constrain the conditions in the Faraday screens local to the sources. We adopt the cosmological redshift, low-frequency radio luminosity and physical size of the large-scale radio structures as our 'fundamental' parameters. We find no correlation of the radio spectral index with any of the fundamental parameters. The observed rotation measure is also independent of these parameters, suggesting that most of the Faraday rotation occurs in the Galactic foreground. The difference between the rotation measures of the two lobes of an individual source, as well as the dispersion of the rotation measure, shows significant correlations with the source redshift, but not with the radio luminosity or source size. This is evidence that the small-scale structure observed in the rotation measure is caused by a Faraday screen local to the sources. The observed asymmetries between the lobes of our sources show no significant trends with each other or other source properties. Finally, we show that the commonly used model for the depolarization of synchrotron radio emission by foreground Faraday screens is inconsistent with our observations. We apply alternative models to our data and show that they require a strong increase of the dispersion of the rotation measure inside the Faraday screens with cosmological redshift. Correcting our observations with these models for redshift effects, we find a strong correlation of the depolarization measure with redshift and a significantly weaker correlation with radio luminosity. We do not find any (anti-)correlation of depolarization measure with source size. All our results are consistent with a decrease in the order of the magnetic field structure of the Faraday screen local to the sources for increasing cosmological redshift.     

The response of an elastic half‐space under a momentary shear line impulse

The response of an ideal elastic half‐space to a line‐concentrated impulsive vector shear force applied momentarily is obtained by an analytical–numerical computational method based on the theory of characteristics in conjunction with kinematical relations derived across surfaces of strong discontinuities. The shear force is concentrated along an infinite line, drawn on the surface of the half‐space, while being normal to that line as well as to the axis of symmetry of the half‐space. An exact loading model is introduced and built into the computational method for this shear force. With this model, a compatibility exists among the prescribed applied force, the geometric decay of the shear stress component at the precursor shear wave, and the boundary conditions of the half‐space; in this sense, the source configuration is exact. For the transient boundary‐value problem described above, a wave characteristics formulation is presented, where its differential equations are extended to allow for strong discontinuities which occur in the material motion of the half‐space. A numerical integration of these extended differential equations is then carried out in a three‐dimensional spatiotemporal wavegrid formed by the Cartesian bicharacteristic curves of the wave characteristics formulation. This work is devoted to the construction of the computational method and to the concepts involved therein, whereas the interpretation of the resultant transient deformation of the half‐space is presented in a subsequent paper. Copyright © 2003 John Wiley & Sons, Ltd.